Wednesday, November 27, 2013

Aquaponics, pt 2

So, I have finally gotten around to setting up the tank for the aquaponics. It just seems that lately there is so much going on that I have been delayed over and over from getting this done, but I suppose it's just life happening. There are times when you have so much time to do what you want, and then there are times you definitely don't...   lol

Anyway, so I moved all the parts to where we are going to have the tank site, which is towards an open southeast corner of our property, so that there is maximum sunlight for the plants, and for the tank (to keep it warm). There is a regular amount of wind coming from the east, off the Gulf, so that I put the tank next to a fence, to see if that breaks the wind and keeps it from cooling the water. The reason that the water temperature is important is because we are going to use tilapia, which is a warm-water fish, in the system. If the fence alone isn't enough, I'll install either plastic sheeting, wood, or even corrugated metal on the fence to do the job.



I started with some rock that we had at the house that we weren't using, from a planter that Lisa and I decided to scrap and redo. The reason for this is to keep the frame from sinking into the ground, since it will also be holding the weight of the upper tank. I suppose you could use wood instead, whether 2x4's or plywood, but this is what we had on hand, and I am starting to see the value (literally!) of re-purposing whatever materials one has available. Since the ground wasn't quite level, a little work with the shovel was needed.





After that, the frame was put on, and the tank slipped into it. I used 2x4's above the lower tank to support the upper tank that will be the grow bed. From here on, I will refer to the lower as the fish tank, and the upper as the grow bed.
As you can see above, there is an offset between the two; this is so that I can see, feed, and scoop the fish from the fish tank, but I also didn't want to make it so large that there would be any issue with the grow bed being unstable and possibly falling off. The above photo is just with the frame, but below is what it looks like with the actual grow bed in the frame as well.



I turned the tank so that the offset faces the sun; to be honest, I don't know if that is necessary, but it just seemed to be a good look to me, as well as seeming to allow the fish tank to get the most (warming) sunlight, without having any affect on the grow bed. We'll see if it makes any difference.






Since we are in the cool part of the year weather-wise, it may be that I need to put some sort of insulation around the fish tank if I don't end up building some sort of greenhouse structure around the aquaponics (I plan on ultimately building two, possibly even three). In any event, I will at least be building a frame around/over this to cover with netting to keep birds and some bugs away. As I do, I will show how that turns out.

So anyway, I am getting closer to having the system up and running; once I put in the filter system, it will take another six weeks of cycling water before the grow medium is ready for planting. Since this is the week of Thanksgiving, I am going to be visiting family, as well as having my son visit us, so I don't know that I will be able to take the time to work on the filter system. We'll see, but I make no promises; if not, within a week or so.








No comments:

Post a Comment