Wednesday, March 12, 2014

Raised beds, part 1


So, I have come to the conclusion that I don't have to have complete projects in order to talk about them, since it can take me a while to finish a project sometimes. Between work, wanting to spend time alone with Lisa, and sometimes just feeling lazy, everything doesn't always come together quickly, so waiting until something is finished might mean not talking about it for longer than I'd like... lol

I've mentioned that I am working on some more raised beds for the garden, and I am doing so. 'More', though, means that I have some, which I do. I made these last year, and they worked well enough; they are 4x8x2, and the soil is a 40/40/20 mix of garden soil, topsoil, and compost. I chose to not use plain dirt for a simple reason: most of the soil here in south Texas kinda sucks. There is a lot of clay in many areas, as well as something called 'black earth', which helps form caliche. For those who haven't heard of caliche, it is when soil becomes hardened and prevents water saturation, as well as making the soil too much of a base to provide good nutrition to plants. So, little wonder that I wanted to avoid working with native soil! Anyway, the soil that is in the beds has worked well so far; not only were we able to grow in it, but it remained fairly soft over the winter, and we have had little problems so far with having to weed. We'll see how well that continues. I have already planted in the current beds; tomatoes, cucumbers, peppers, and carrots. This is what the 'old' beds look like:





I am in the process of making two more beds, although I am using some materials that I happen to have on hand rather than buying 8x12's. I am using some 2x4's, buying a few 4x4's, and cutting up some corrugated metal panels that I was able to scrounge up from people that were in the process of tearing down an old barn. I am using the same dimensions of 4x8x2, because it seems to be a really good size, large enough to grow plenty of a crop in, without being so big that we can't reach any spot in the bed easily. It is also easier on the back than bending all the way down to work the ground; right now, that really isn't that much of a deal, but as I get older, I can imagine that it will be a blessed bonus. We are currently splitting the beds in half, planting two crops in one, but as we enlarge the garden, the plan is to use each one for a different crop. Of course, that will depend on how big the garden gets; the plan is to make it a little larger every year, until it starts to feel too much like work to take care of. At that point, we will stop enlarging, and work with what we have. I'm thinking that we will get to at least 10 beds, but as with so many things, time will tell.

Anyway, this is what the first partially constructed bed is looking like.





In this version, I'm using ends and middles of 4x4's, with 2x4's as the bracing that connects them, and that the corrugated metal is attached to. The construction is fairly simple, and I think it should be more than strong enough to hold up against the weight of the soil when it gets added. I added some small braces on the middle of the supports, just in case; I'm one of those people who worry about stuff like that. I figure, better to have it and not need it than need it and not have it. Because the slowest part of this construction is the measuring of the corrugated panels so that they can be cut to the right length, I'm considering putting in a single length of corrugated metal, and attaching the middle brace afterwards, with the metal between the brace and the support. If that happens, I'll take some more pictures to show how that worked, or didn't. I could have trimmed the bottom edge that you can see in the pictures, but I think that it will be fine just tucking it under, and work towards keeping grass from growing in through the bottom. 

Underneath, and you can see just a bit of it in the photos of the finished beds, I cut up an old pool liner to keep the tough, weedy, hard to kill grass that lies under the bed from growing up and choking out our vegetables, as well as cutting a 4x8 section of animal fencing (which is stronger than chicken wire, consisting of stronger wire in 1" x 3" rectangles) in order to keep moles and whatnot from burrowing up into the beds and chowing down. Since I don't have any more of that liner left, I'll be putting a double layer of weed mat down instead. In the background of the top photo, you can see the small fence that I put up to keep out rabbits; if deer become an issue, then I will have to raise the fence and look into a solar-powered electric fence. So far, though, even though there are some deer in the area, they have not been a problem in the garden; the dogs may be earning their keep in that regard.

As for the soil, while I have been quite happy with the performance of the mix, the drawback is that it is more expensive than I'd like, considering that it takes about 40 bags to fill a bed. So, I started researching what I could do to create better soil, cheaper. What I found is that the best soil for growing is called sandy loam, which is 60% sand, 25% silt, and 15% clay, or thereabouts. I'm going to bring in a truckload of soil, test it, and add sand as needed to create something near that balance, so that I can use it for any beds that are created in the future. Bringing in about 5 yards of soil will only cost about $150, and sand is not expensive either. It may not be feasible for a large farm, but on a small scale, I think it's definitely do-able. Besides, whatever soil isn't used can be put to use creating a berm for a gun range in the back yard.

There are definitely advantages to living outside city limits...

No comments:

Post a Comment